16SG-030PA Series DC Gear Motors Wide speed range, compact size, high torque |
Gearhead | Motor | Available accessories |
♦ Material : metal | ♦ Motor Type : permanent magnet | ♦ Magnetic encoder, 3ppr |
♦ Shaft : stainless steel 3mm diameter, D-shaped |
♦ Rotation : CW / CCW reversible | ♦ Mounting bracket |
♦ Gearing : high precision, high strength various gear ratios |
♦ Brush : precious metal brush or carbon brush |
♦ Extended rear shaft |
♦ Lead wires & connector |
Additional information |
Dimension Drawing |
Gear ratio | 18 | 25 | 36 | 60 | 85 | 100 | 120 | 169 | 239 | 336 | |
Gearhead Length (L) | mm | 12.5 | 14 | 15.5 |
Model |
Rated Voltage |
No-load | Rated | At Stall | |||||
Speed | Current | Speed | Torque | Current | Power | Torque | Current | ||
V DC | RPM | mA | RPM | g.cm | mA | W | g.cm | A | |
030PA-5 | 5 | 11500 | 45 | 9000 | 5 | 200 | 0.45 | 23 | 0.75 |
030PA-6 | 6 | 11500 | 35 | 9000 | 5 | 140 | 0.45 | 23 | 0.6 |
030PA-12 | 12 | 12500 | 20 | 9750 | 5 | 75 | 0.5 | 23 | 0.27 |
Gear ratio | 18 | 25 | 36 | 60 | 85 | 100 | 120 | 169 | 239 | 336 | |
No-load Speed | RPM | 620 | 450 | 310 | 185 | 130 | 110 | 95 | 67 | 48 | 34 |
Rated Speed | RPM | 500 | 360 | 250 | 150 | 105 | 90 | 75 | 53 | 38 | 28 |
Rated Torque | Kg.cm | 0.06 | 0.09 | 0.12 | 0.2 | 0.26 | 0.35 | 0.36 | 0.5 | 0.7 | 1 |
Stall Torque | Kg.cm | 0.29 | 0.4 | 0.6 | 0.8 | 1.2 | 1.6 | 1.7 | 2.3 | 3 | 3 |
Gear ratio | 18 | 25 | 36 | 60 | 85 | 100 | 120 | 169 | 239 | 336 | |
No-load Speed | RPM | 620 | 450 | 310 | 185 | 130 | 110 | 95 | 67 | 48 | 34 |
Rated Speed | RPM | 500 | 360 | 250 | 150 | 105 | 90 | 75 | 53 | 38 | 28 |
Rated Torque | Kg.cm | 0.06 | 0.09 | 0.12 | 0.2 | 0.26 | 0.35 | 0.36 | 0.5 | 0.7 | 1 |
Stall Torque | Kg.cm | 0.29 | 0.4 | 0.6 | 0.8 | 1.2 | 1.6 | 1.7 | 2.3 | 3 | 3 |
Gear ratio | 18 | 25 | 36 | 60 | 85 | 100 | 120 | 169 | 239 | 336 | |
No-load Speed | RPM | 660 | 480 | 340 | 200 | 145 | 120 | 100 | 73 | 50 | 37 |
Rated Speed | RPM | 540 | 390 | 280 | 160 | 115 | 97 | 80 | 58 | 41 | 29 |
Rated Torque | Kg.cm | 0.06 | 0.09 | 0.12 | 0.2 | 0.26 | 0.35 | 0.36 | 0.5 | 0.7 | 1 |
Stall Torque | Kg.cm | 0.29 | 0.4 | 0.6 | 0.8 | 1.2 | 0.6 | 1.7 | 2.3 | 3 | 3 |